Wire Winding and Torsion Tester AH41052
Wire Winding and Torsion Tester is used for the copper rods, aluminum rods, steel wires to do torsion and winding test according to certain speed.
Testing method: Fix one end of the sample, and the other end 360°continuous torsion.
| Samples’ diameter | Cooper bar: ＜Φ8mm, Steel wire: ＜Φ3mm |
|---|---|
| Torsion speed range | (10, 30, 60) r/Min |
| Distance between clips | 0-500mm |
| Clip type | Chuck type |
Details About Wire Winding and Torsion Tester AH41052
Standard:
GB4909.4-2009
GB4909.7-2009
Technical Parameters:
Winding Test
- Samples’ diameter: Cooper bar: ＜Φ8mm, Steel wire: ＜Φ3mm
- Torsion speed range: (10, 30, 60) r/Min
- Distance between clips: 0-500mm
- Clip type: Chuck type
- Winding range: Aluminum wire: Ф3-6mm, using mandrel, ＜Ф3mm, recommended to wind manually. Steel wire: ＜Φ4mm
- Mandrel range: φ1mm, φ2mm, φ3mm, φ4mm, φ5mm, φ6mm, φ8mm, φ10mm, φ12mm, φ14mm, φ16mm
- Weights: 1 set
Specification:
- Overall dimension: 1400*530*1100 mm
- Power: AC220V, 50/60Hz, 4A
Share Wire Winding and Torsion Tester AH41052 With Others
Share on facebook
Share to Facebook
Share on twitter
Share to Twitter
Share on linkedin
Share to LinkedIn
Share on pinterest
Share to Pinterest
