Wire and Cable Smoke Density Tester AH68015
Wire and Cable Smoke Density Tester is used for testing the smoke density of wire and cables.
Measurement principle: Lambert-Beer Law.
Measurement indicators: OD and DS of smoke.
Details About Wire and Cable Smoke Density Tester AH68015
Standard:
GB/T17651.1-2
IEC61034-1997
Technical Parameters:
- Burning device: Long rod igniter to ensure the safety of testers. Stainless steel burning test bracket with self-tightening clamp holder, stainless steel alcohol tray. Bottom size: 210*110mm, top size: 240*140mm, height: 80mm
- Light path system: The light source is modified by German imported optical system, tungsten wire quartz lamp voltage DC12V, power 100W, nominal luminous flux 2000-3000lm, nominal color temperature 2800-3200K, lens beam can be adjusted 1.5m±0.1m. Adopts an optical receiver consisting of imported high-resolution silicon photo cells.
- Test software: Smoke density DAQ test software, optical path calibration system, 0, 100% point calibration, desktop and notebook can be operated.
Specification:
- Control cabinet: 400*440*200 mm
- Power: AC 220V, 50/60Hz, 1A
- Burning Chamber: 3*3*3 m (Optional)
- Computer: Standard configuration
Share Wire and Cable Smoke Density Tester AH68015 With Others
Share to Facebook
Share to Twitter
Share to LinkedIn
Share to Pinterest
