Electric Low temperature Tensile Test Device

Applicable scope:

Polymer materials, wire and cable, rubber, plastic etc. insulating sheath.

Standard:

GB/T2951.14-2008

Technical parameters:

• Electrical control box: It’s consisted of 3 groups of displacement displayer, tensile indication, reset and speed adjustment system. (Tensile speed has been set well before delivery.)
• Displacement displayer can show the displacement length accurately. When sample starts tensile, it will show displacement automatically, and when sample is broken down, displacement number will stop on the pulled off moment number. (units: mm)
• Motor power: 90W, outside of the low temperature chamber
• Max tensile length: 220mm
• Tensile speed: 20-30mm/Min
• Clip type: Non-selftightening type.
• Sample dimension: Ⅰ, Ⅱ Dumbbell pieces

Specification:

• Overall dimension:
• Tensile device: 390*245*280 mm
• Control box: 440*400*200 mm
• Power: AC220V, 50/60Hz, 2A
• This test device is used together with the low temperature chamber.

High and Low Temperature Test Chamber

Low temperature Impact Test Device

Low temperature Winding Test Device