Menu
Details About Cable material thermal deformation Test Device
Standard:
GB8815-2008
Technical parameters:
- Total pressure: 3.50 ± 0.02N
- Plane diameter of the end of the pressure bar: 3.15 ± 0.03, test compression frame: 6 positions.
- Sample requirements: A circular piece of Φ12mm or a square with a side length of 12mm.
- Test device:
- The test device consists of a fixed support, a movable sample press frame, a rotating sample platform, and a tray.
- The fixed support is the base of the test device.
- The movable sample press frame consists of a cylindrical pressure bar and a heavy hammer frame, wherein: the end of the cylindrical pressure bar is a plane with a diameter of 3.15±0.03 mm; the weight frame acts on the cylindrical pressure. The total downward pressure on the rod is 3.50 ± 0.02 N.
- Rotating the sample platform (or horizontal bracket) for placing the sample and guiding the movable sample holder, and the sample limiting piece <4> is arranged on the platform;
- The tray serves to raise and lower the movable sample holder.
Share Cable material thermal deformation Test Device With Others
Share on facebook
Share to Facebook
Share on twitter
Share to Twitter
Share on linkedin
Share to LinkedIn
Share on pinterest
Share to Pinterest