Rubber and Plastic Low temperature Embrittlement Tester
Rubber and Plastic Low-temperature (Impact) Embrittlement Tester is used for testing the vulcanized rubber’s max temperature (brittleness temperature) when in the specified condition appearing break under the impact.
| Impact speed | 2m/s ±0.2m/s |
|---|---|
| Cold well volume | 700ml |
Details About Rubber and Plastic Low temperature Embrittlement Tester
Features:
Add a cold well blended in the original design, which makes the container around more uniform temperature, and the temperature will drop faster, so that you can save much time and reduce the energy consumption.
Standard:
GB/T 1682
GB/T 5470
Technical parameters:
- Testing temperature: -70℃/-40℃-RT (Optional)
- Impact speed: 2m/s ±0.2m/s
- After constant temperature, temperature fluctuation in 3 Min: ＜±0.5℃
- Distance between impartor center and lower end of holder: 11±0.5mm
- Cold well volume: 700ml
Specification:
- Overall dimension: 720*700*1380 mm
- Power: AC220V, 50/60Hz, 5A
Share Rubber and Plastic Low temperature Embrittlement Tester With Others
Share on facebook
Share to Facebook
Share on twitter
Share to Twitter
Share on linkedin
Share to LinkedIn
Share on pinterest
Share to Pinterest
