Wire Winding and Torsion Tester AH41052

Wire Winding and Torsion Tester is used for the copper rods, aluminum rods, steel wires to do torsion and winding test according to certain speed.

Testing method: Fix one end of the sample, and the other end 360°continuous torsion.

Details About Wire Winding and Torsion Tester AH41052

Standard:

GB4909.4-2009

GB4909.7-2009

Technical Parameters:

Winding Test

Samples’ diameter: Cooper bar: ＜Φ8mm, Steel wire: ＜Φ3mm
Torsion speed range: (10, 30, 60) r/Min
Distance between clips: 0-500mm
Clip type: Chuck type
Winding range: Aluminum wire: Ф3-6mm, using mandrel, ＜Ф3mm, recommended to wind manually. Steel wire: ＜Φ4mm
Mandrel range: φ1mm, φ2mm, φ3mm, φ4mm, φ5mm, φ6mm, φ8mm, φ10mm, φ12mm, φ14mm, φ16mm
Weights: 1 set

Specification: