Menu
Single Wire and Cable Tilting Burning Tester
Single Wire and Cable Tilting Burning Tester is designed according to the ISO6722-2006 testing standard. Fix both ends of the sample and put it in the metal cover vertically whose three sides are metal plate. Then light the blowtorch, to make the blue inner cone’s cusp is 50mm from the sample’s bottom, and contact with the sample’s surface. In this way, sample is 45°tilting with the level plane.
Burning blowtorch | Imported from Hamburg, U.S |
---|---|
Ignition | Automatic high voltage ignition |
Flowmeter | 0.1-1L/Min |
Details About Single Wire and Cable Tilting Burning Tester
Standard:
ISO6722-2006
QC/T 730-2005
GB/T14820-2009
GB/T25085-2010
Technical parameters:
- Metal cover: Electric chamber and the metal cover are designed as one piece. Material: A3 painting plate.
- Burning blowtorch:
- Imported from Hamburg, U.S.
- Inner diameter of the combustion tube: 9mm
- Flame height: 100mm
- Cone length of the internal blue flame: 50mm
- The machine will stop automatically when the burning time reaches preset time.
- Ignition: Automatic high voltage ignition.
- Flowmeter: 0.1-1L/Min
Specification:
- Overall dimension: 1000*600*1000 mm
- Power: AC220V, 50/60Hz, 1A
- Gas source: Propane, or gas (Customer-owned)
Share Single Wire and Cable Tilting Burning Tester With Others
Share on facebook
Share to Facebook
Share on twitter
Share to Twitter
Share on linkedin
Share to LinkedIn
Share on pinterest
Share to Pinterest